Seal Light Switch Cover
Buy 3, save 10% · Buy 4, save 15% · Free shipping on 2 or more
Not a care in the world
Stretched out across the top of your switch with its tail in the air, this seal is the picture of a lazy afternoon on the rocks. Low and wide, so it lounges like a little shelf ornament rather than standing tall.
- Renter-friendly. No drilling, no wall damage, no bond at risk
- For sea-life lovers, beach houses, and anyone who wishes they were still on holiday
- Looks best in a bathroom, laundry or kids' room
Choose your orientation
- Right-facing — the seal's head points to the right
- Left-facing — the seal's head points to the left
Pick whichever suits your wall and the way you'd like it to face.
The details
- Approx. 5.3cm tall x 9.3cm wide
- Projects approx. 2.4cm from the wall
- Matte white PETG, hand-finished & made in Australia
- Pre-fitted reusable adhesive tabs included
Not sure if your switch suits? Have a look at the Fit Guide.
Fit Guide
How to Install (In 10 Seconds)
Peel the liners off the two adhesive tabs on the base. Press the Switch Mate onto your switch plate, holding for five seconds. That's it. No tools, no drilling, no electrician, and nothing touches your wall.
To remove, peel away slowly from one side. The tabs lift cleanly off the switch plate and the Switch Mate can be repositioned or moved to another room. Replacement tabs are available at any hardware shop or supermarket.
Will It Fit?
Switch Mates grip the raised sides of your switch, so the only thing that matters is depth, not brand. If your switch has a side profile deeper than 12mm, it'll fit. Most standard Australian switches do.
The quickest check: look at your switch side-on. If it sits proudly off the wall with a raised straight edge over 12mm, you're good. If it's sleek, angled and or sits almost flat, it's too thin.
Not suitable for angled-profile or slimline switches, including Clipsal Iconic slimline, Clipsal Pro and Hager Allure.
Still unsure? Send us a photo of your switch and we'll tell you.
Material Quality
3D printed in matte white PETG, then hand-sanded and finished by us on Russell Island, Queensland.
We use PETG rather than the cheaper PLA most 3D-printed decor is made from, because PETG holds its shape at far higher temperatures. PLA begins softening around 60°C, which a sunny wall can reach. PETG stays stable well beyond that, so your Switch Mate won't sag or lose detail through an Australian summer. It's also tougher and less brittle, which matters for something you'll peel off and reposition.
Each piece is printed to order and checked before it's packed. Small variations in surface finish are normal and are part of how they're made.
Shipping & dispatch
Dispatched within 2 business days from Queensland.
Flat $8.95 postage anywhere in Australia, free on orders of 2 or more. Tracking emailed when it ships. Australia only for now.